Apply an all-over coat of Super White Primer, once thoroughly dry follow it with a coat of Satin Super White. Mask off the end panel and spray it with Satin Super Lemon.

When dry, measure the cot's end panel, and work out where its centre point is. Mark the point with a pencil.

Use masking tape to mark out a square measuring 20cm × 20cm, making sure its centre point is the point you marked earlier. Protect the rest of the panel with masking tape and newspaper, and spray with Satin Super Pastel Green.

While the paint is drying, cut a circle from a sheet of thick paper measuring 10cm in diameter. Once everything has dried, use Repositional Adhesive to place the paper in the centre of the green square, leaving all the masking tape and newspaper in place. Press the edges of the circle down firmly.

Spray a light coat of Satin Super Orange on the exposed green area .Whilst the paint is still tacky (this stops the paint from being pulled up as you remove the tape), peel off the circle and the rest of the paper and masking tape.

Note: Always follow usage instructions on the reverse of Plasti-kote spray paint cans.