Find the best Plasti-kote Spray Paint here:
Designer Glass Lamp
Add a designer touch to your living room or bedroom with your own personalised glass lamp. Plasti-kote spray paints make it quick and easy to create a professional looking painted lamp, and for a fraction of the cost that you would pay from a high street store. All you need is a glass lamp, some Plasti-kote paints and a little inspiration.
Print this ideaPlain glass lamp
Masking tape
Scissors (or craft knife)
Newspaper
Satin Super Lemon
"If you don't have a glass lamp, you can instead add a sparkle to a ceramic lampbase with Plasti-kote Metallic or Brilliant Metallic spray paints."
.jpg)
.jpg)
|
.jpg)
|
Select your glass lamp. You may already have an old one hidden in your loft, if not these can be purchased from most DIY or high street stores. Or try your local car boot sale, second hand shop or online auction (Please ensure that any second hand electrics are checked out by a qualified electrician before using).
Clean the surface with a damp cloth and allow it to dry before proceeding.
Place newspaper underneath and around the lamp to protect the work surface.
Cut thin strips of masking tape and wrap around lamp, making sure all the edges of the tape are flat and stuck to the surface of the lamp.
Make sure all areas of the lamp are covered other than the area you are spraying. For costsaving you only need about an inch wide strip of masking tape either side of the area you are spraying the rest of the lamp can be protected with newspaper stuck down using masking tape.
Spray the first colour, and wait 45 minutes.
Spray the second colour, and wait 45 minutes. Each subsequent colour mask should slightly overlap the next as desired (some areas can be left clear).
Note: Always follow usage instructions on the reverse of Plasti-kote Spray Paint cans.
.jpg)
.jpg)