Radiator
- Quick and easy to use
- Non yellowing formula
- Resists heat up to 100ºC
- Available in gloss and satin finishes
This product is specially formulated to make painting radiators quick and easy. The finish obtained is both durable and professional. There are no brushes to clean and you will not be left with brush marks on your radiator.
.jpg)
.jpg)
664
.jpg){kind=small}
665
618
.jpg){kind=small}
660
For interior use.
Use only in well ventilated areas. Ensure surface is clean and dry. Shake can well before use and between applications. Three thin coats are recommended rather than one heavy coat. The use of a Plasti-kote primer is recommended on bare surfaces. Before applying spray on an inconspicuous area to ensure compatibility and suitability.
Allow to dry for 5 minutes between coats. Touch Dry in 10 - 20 minutes. Thoroughly dry in one hour.
For cans with the new pinch and pull cap please follow instructions below:
Recoat within 4 or after 36 hours otherwise paint may wrinkle. Touch dry in 30-50 minutes, thoroughly dry in 2-3 hours.
Approximately 2.23m²
Metal